Reason 2.5 and Rex loops

with industry Pro, Nick Batzdorf

Moderators: admin, mdc, TAXIstaff

Post Reply
liamkelly
Serious Musician
Serious Musician
Posts: 1106
Joined: Tue Jun 23, 2009 5:20 pm
Contact:

Reason 2.5 and Rex loops

Post by liamkelly » Sat May 17, 2008 10:08 am

Hey AllHow can I slice up a Rex loop in Reason such that each component (kick, snare etc) is routed to a different channel (either in Reason or through Rewire into Cubase’s mixer).I know I can isolate the component sounds/slices using my MIDI controller but don’t know how to route them from there. Obviously, I could reprogram the loop. But more obviously (to me anyway) I can’t Too tricky.Any ideas? Guess what I’m really asking is if there’s an easy way to apply individual EQ/pan/compression to different slices of a Dr Rex loop in Reason? Yup… that’s what I’m trying to say Thanks Liam

slideboardouts
Committed Musician
Committed Musician
Posts: 588
Joined: Fri Sep 14, 2007 6:30 pm
Gender: Male
Contact:

Re: Reason 2.5 and Rex loops

Post by slideboardouts » Sat May 17, 2008 10:39 am

Hey Liam,I might be wrong, but off the top of my head I don't think you can do what you are talking about. As far as I know, you can only do that with ReDrum. That is why I rarely use drum loops for my songs. You just don't have enough control for a lot of applications.The only thing I can think of would be to make a separate Dr. Rex player loaded with the same drum loop for each sound you were going to use. I do that sometimes but usually only with high hats as a lot of the drum loops have a high hat sound that I need but isn't really available in the stock redrum library.Good luck with it.-Steve

User avatar
mazz
Total Pro
Total Pro
Posts: 8411
Joined: Sat Nov 11, 2006 6:51 am
Gender: Male
Location: San Francisco
Contact:

Re: Reason 2.5 and Rex loops

Post by mazz » Sat May 17, 2008 10:55 am

Yes!Load the loop in to NNXT (it will read REX files directly from its browser). Each slice will be automatically given a key on the keyboard chromatically ascending (a zone in NNXT language). In NNXT you can assign each zone to an output (hit the tab key and you'll see separate outputs from NNXT). You can then do what you want with each zone.You'll have to probably put the REX loop in Dr. Rex first and then send it to a MIDI track in the Reason Sequencer. Then re-assign the track to trigger the NNXT instead of Dr. Rex.Happy looping!!Mazz
Evocative Music For Media

imagine if John Williams and Trent Reznor met at Bernard Hermann's for lunch and Brian Eno was the head chef!
http://www.johnmazzei.com
http://www.taxi.com/johnmazzei

it's not the gear, it's the ear!

liamkelly
Serious Musician
Serious Musician
Posts: 1106
Joined: Tue Jun 23, 2009 5:20 pm
Contact:

Re: Reason 2.5 and Rex loops

Post by liamkelly » Sat May 17, 2008 11:18 am

May 17, 2008, 1:55pm, mazz wrote:Yes!Load the loop in to NNXT (it will read REX files directly from its browser). Each slice will be automatically given a key on the keyboard chromatically ascending (a zone in NNXT language). In NNXT you can assign each zone to an output (hit the tab key and you'll see separate outputs from NNXT). You can then do what you want with each zone.You'll have to probably put the REX loop in Dr. Rex first and then send it to a MIDI track in the Reason Sequencer. Then re-assign the track to trigger the NNXT instead of Dr. Rex.Happy looping!!MazzSteve: thanks so much for helping. I appreciate it.Mazz: You're an absolute beauty!!! You've saved me a ton of work here Glenmorangies for you, Jean and I at the Rally, no doubt. BTW, tell her I say hi Sincere thanks Liam

slideboardouts
Committed Musician
Committed Musician
Posts: 588
Joined: Fri Sep 14, 2007 6:30 pm
Gender: Male
Contact:

Re: Reason 2.5 and Rex loops

Post by slideboardouts » Sat May 17, 2008 11:25 am

May 17, 2008, 1:55pm, mazz wrote:Yes!Load the loop in to NNXT (it will read REX files directly from its browser). Each slice will be automatically given a key on the keyboard chromatically ascending (a zone in NNXT language). In NNXT you can assign each zone to an output (hit the tab key and you'll see separate outputs from NNXT). You can then do what you want with each zone.You'll have to probably put the REX loop in Dr. Rex first and then send it to a MIDI track in the Reason Sequencer. Then re-assign the track to trigger the NNXT instead of Dr. Rex.Happy looping!!MazzNice!I totally forgot about being able to load Rex files into the NNXT.Thanks Mazz!-Steve

User avatar
mazz
Total Pro
Total Pro
Posts: 8411
Joined: Sat Nov 11, 2006 6:51 am
Gender: Male
Location: San Francisco
Contact:

Re: Reason 2.5 and Rex loops

Post by mazz » Sat May 17, 2008 12:06 pm

May 17, 2008, 2:18pm, liamkelly wrote:May 17, 2008, 1:55pm, mazz wrote:Yes!Load the loop in to NNXT (it will read REX files directly from its browser). Each slice will be automatically given a key on the keyboard chromatically ascending (a zone in NNXT language). In NNXT you can assign each zone to an output (hit the tab key and you'll see separate outputs from NNXT). You can then do what you want with each zone.You'll have to probably put the REX loop in Dr. Rex first and then send it to a MIDI track in the Reason Sequencer. Then re-assign the track to trigger the NNXT instead of Dr. Rex.Happy looping!!MazzSteve: thanks so much for helping. I appreciate it.Mazz: You're an absolute beauty!!! You've saved me a ton of work here Glenmorangies for you, Jean and I at the Rally, no doubt. BTW, tell her I say hi Sincere thanks LiamWow! Beer and now Scotch! Will I remember the 2008 Rally? Maybe not! Glad to be of assistance Liam!Mazz
Evocative Music For Media

imagine if John Williams and Trent Reznor met at Bernard Hermann's for lunch and Brian Eno was the head chef!
http://www.johnmazzei.com
http://www.taxi.com/johnmazzei

it's not the gear, it's the ear!

Post Reply

Who is online

Users browsing this forum: No registered users and 102 guests